|
|
|
|
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
10 inch Water Purification System (WH-10-2UV) with UV Lamp Our popular 10 inch Water Purification system but with Ultra Violet (UV) Disinfection to remove harmful micro-organisms and Hydrodynamic Magnetics to prevent scaling. The system is installed into the incoming water supply to the home. PureFlow water purification systems provide safe, naturally cleaned water of superb quality from municipal supplies to the end user. Purification of water at point-of-entry for FAMILY HOUSES, FLATS, COTTAGES, CHALETS, TOWN HOUSES, DUETS etc THE READY-TO-BE-INSTALLED UNITS WORK IN FOUR STAGES:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
![]() |
*PLEASE NOTE: The hydrodynamic magnetics have been designed into the Ultra-Violet (UV) reactors to keep them clean and maintenance free. However, the magnetic conditioning is still effective somewhat downstream of the purifier. In case of exceptionally hard water (too high Calcium/Magnesium content), we recommend an additional water conditioner.
Technical Data |
|
Whole Home - Model WH-20-UV |
Applications |
|
Purification of water at point-of-entry for |
Standard Features |
|
|
Dimensions (mm) |
|
500 x 400 x 160 |
In/Outlet |
|
20mm / ¾” BSP male |
Mass |
|
13 kg |
Nominal Capacity |
|
20 ℓ/min @400kPa with new filters |
Nominal Pressure |
|
2 to 4 bar – pressure reduction valve required |
Nominal Temperature |
|
20ºC |
Power Supply |
|
220V 50/60 Hz |
Power Consumption |
|
15W |
Disinfection |
|
UV-C 254nm |
Filtration |
|
1st Stage – nominal 20 µm |
INSTALLATION IS SIMPLE – AT YOUR HOUSE, INTO THE EXISTING SUPPLY LINE NO IN-BETWEEN STORAGE TANK OR ADDITIONAL PUMP IS REQUIRED!
PureFlow - The Ultimate - Naturally!